Enter a tool name or topic.
Prepare a preliminary conduit takeoff by entering the lengths of independent straight routes and the number of repeated runs. The estimator counts full-length sticks per run, straight couplers at joints and support positions using your own spacing and waste allowance. All inputs stay in your browser.
Choose a task. Inputs stay in this page only.
Independent runs use 11 base sticks, eight joints and 25 endpoint/intermediate support positions; one additional stick is added for waste.
No. Support spacing is supplied by you. Check the conduit material, size, fixing method, relevant standards and site conditions.
Calculate geometric cable occupancy from conduit inner diameter and equal cable sizes. This is area occupancy only, not a code-compliance or cable-pulling approval.
A worked example using the listed default inputs. Ideal equal-angle two-bend offset geometry, not a brand-specific bender multiplier or pipe elasticity model.
No. Check verified rates, conditions and underlying rules first. Ideal equal-angle two-bend offset geometry, not a brand-specific bender multiplier or pipe elasticity model.
PangPang Tools