PangPang ToolsBore diameter (mm): 500, Bore depth (m): 6, Bore count: 4
Bore section: 0.19635 m²Using these sample input values gives the first labelled output above. Uniform cylindrical bore geometry only; excludes widened base and overruns.
Construction & Electrical
Drilled Shaft Concrete Calculator
About this tool
Drilled Shaft Concrete Calculator performs a browser-local calculation using measurements and quantities you control. The results are presented as labelled figures so each number is easy to interpret. Uniform cylindrical bore geometry only; excludes widened base and overruns.
Concrete & volume
Choose a task. Inputs stay in this page only.
MAKE IT SIMPLE
Result
Worked examples
Questions & answers
Can I use the default numbers for purchasing or safety certification?
No. Replace the examples with your real values. Uniform cylindrical bore geometry only; excludes widened base and overruns.
MAKE IT SIMPLE
Result
Worked examples
5 m × 4 m × 150 mm; 1 item; allowance 5%
Geometric 3 m³; extra 0.15 m³; total 3.15 m³Convert 150 mm to 0.15 m before multiplying 5×4×0.15, then add the chosen 5%.
MAKE IT SIMPLE
Result
Worked examples
Slab length (m) 10 · Slab width (m) 6 · Thickness (cm) 15 · Opening area (m²) 0
First calculated quantity: 60.0000 m²Calculate slab concrete volume from length, width, thickness and floor openings. Subtract openings before multiplying by thickness; waste, reinforcement and supplier ordering are separate.
MAKE IT SIMPLE
Result
Worked examples
Wall length (m) 10 · Wall height (m) 3 · Thickness (mm) 200 · Opening area (m²) 2
First calculated quantity: 28.0000 m²Measure concrete wall volume after deducting door and window openings. Openings are entered as surface area; wall thickness is assumed uniform.
MAKE IT SIMPLE
Result
Worked examples
Column diameter (mm) 400 · Column height (m) 3 · Column count 6
First calculated quantity: 0.376991 m³Calculate concrete volume for round solid columns using diameter, height and quantity. Columns are assumed solid circular cylinders. Deduct large voids separately.
MAKE IT SIMPLE
Result
Worked examples
Beam width (mm): 300, Beam height (mm): 600, Beam length (m): 24
Beam cross section: 0.18 m²Using these sample input values gives the first labelled output above. Gross rectangular volume; deduct overlaps with columns and slabs separately.
Questions & answers
Can I use the default numbers for purchasing or safety certification?
No. Replace the examples with your real values. Gross rectangular volume; deduct overlaps with columns and slabs separately.
MAKE IT SIMPLE
Result
Worked examples
Total footing run (m) 30 · Footing width (m) 0.6 · Footing depth (m) 0.5
First calculated quantity: 0.300000 m²Estimate rectangular continuous footing concrete by run length, footing width and depth. The result assumes a constant rectangular footing section, not stepped or sloped excavation.
MAKE IT SIMPLE
Result
Worked examples
Target volume (m³) 2 · Product yield per bag (L) 15 · Extra material (%) 5
First calculated quantity: 2.10000 m³Estimate full bag count from target concrete volume and product yield per bag. Use the yield printed on the actual product. Do not infer yield from bag weight alone.