PangPang Tools100×10 mm steel flat, 6 m long at 7,850 kg/m³
7.85 kg per metreEstimate theoretical weight for rectangular metal sections or solid round rods. Supply actual dimensions and bulk material density, and compare the resulting kilograms and cost.
Construction & Electrical
Metal Plate and Round Bar Weight Calculator
About this tool
Estimate theoretical weight for rectangular metal sections or solid round rods. Supply actual dimensions and bulk material density, and compare the resulting kilograms and cost.
Rebar & metal quantities
Choose a task. Inputs stay in this page only.
MAKE IT SIMPLE
Result
Worked examples
MAKE IT SIMPLE
Result
Worked examples
16 mm bars, ten 6 m lengths
About 94.7 kg theoretical steelCalculate approximate reinforcing steel weight from nominal diameter, cut length and number of bars. The widely used D²/162.2 kg/m estimate is theoretical and is not a bar bending schedule.
MAKE IT SIMPLE
Result
Worked examples
Slab long side (m): 10 · Slab short side (m): 6 · Center spacing (mm): 200 · Edge cover (mm): 40 · Grid layers: 2
Bars per layer: 82A worked example using the listed default inputs. Rectangular slab grid with uniform spacing and two orthogonal directions; ignores splice, hooks, anchorage and bar clashes.
Questions & answers
Is the output a legally or technically certified result?
No. Check verified rates, conditions and underlying rules first. Rectangular slab grid with uniform spacing and two orthogonal directions; ignores splice, hooks, anchorage and bar clashes.